Qtech Australia
 

Water & Utilities Treatment Systems

WATER IS A FACT OF LIFE
RELIABLE TREATMENT SYSTEMS

water and wastewater treatment solutions for utilities, infrastructure and industrial operations

Qtech designs, manufactures, installs and supports water and wastewater treatment systems built around site conditions, compliance needs and long-term performance.

Request a Treatment System Review
Why Qtech Is Trusted for Water & Utility Projects

Built for local site conditions

Qtech systems are designed with Australian water, wastewater and utility environments in mind. We consider site conditions, operating pressures, compliance needs and long-term maintenance from the start, so the solution is practical in real use.

From assessment to ongoing service
Qtech can support your project from the first site review through to design, manufacture, installation, commissioning and long-term servicing. This gives clients one practical team across the full treatment system lifecycle.

Designed with performance and monitoring in mind
Water and wastewater systems need to meet operational and environmental expectations. Qtech designs solutions that support treatment performance, monitoring requirements and more reliable day-to-day operation.

Simple to operate, maintain and support
A treatment system must work beyond installation day. Qtech focuses on systems that are suitable for the site, simple enough for operators to manage and backed by technical support when needed.

Water Systems That Perform

Supporting essential water and wastewater operations with practical, site-specific solutions.

Across Australia, water and wastewater services are critical to communities, infrastructure and industry. Qtech supports projects where system performance, compliance and reliability matter.

We work with utilities, councils, infrastructure providers, industrial operators and commercial sites that need practical treatment systems and long-term technical support.

Need help with a treatment system?
SPEAK TO QTECH →
WHERE QTECH CAN HELP
Chemical Dosing Systems

Accurate, automated dosing for water and wastewater treatment.

Recycled Water Applications

Treatment support for reuse, monitoring and long-term reliability.

Water Treatment Systems

Filtration, dosing, pH adjustment and water quality improvement.

Filtration Systems

Practical filtration solutions for process water, wastewater and utility sites.

Wastewater Treatment Systems

Chemical treatment, solids removal, DAF support and system optimisation.

System Upgrades

Improve ageing or underperforming infrastructure.

Servicing & Maintenance

Preventative maintenance, troubleshooting and technical support.

Compliance Support

Practical systems designed with operational and monitoring needs in mind.

Automation & Monitoring

Remote monitoring, alarms, data logging and control systems.

Qtech Australia

Trusted Where Performance Matters
Client stories from projects where performance, response time and long-term support mattered.

Qtech’s support—from the top down—is impeccable. They turn up whenever we need them and always find a way to save the day. They’ve saved us thousands just by lowering our BODs. I would recommend Qtech to anyone who values reliable support and real results.

Claude Gebrael - Engineering & Maintenance Manager - Steric

We've been extremely pleased with our compliant Tradewaste system from Qtech Australia. It not only meets but exceeds the high standards of governing bodies, making our site more environmentally friendly and sustainable. Having this comprehensive package, combined with your ongoing professional service and support, has been invaluable.

We initially chose Qtech Australia because of your clear industry expertise and proven ability to bring sites up to the required standards. Your tailored solutions, which took into account our specific needs and limitations, coupled with competitive pricing, were exactly what we were looking for. Our previous system simply wasn't performing adequately. The quotation and installation processes were remarkably smooth, and knowing we could trust and rely on your team made everything much easier.

Since implementing the Qtech system, our water quality test results have significantly improved. Your knowledgeable service technicians are always available to answer any questions we have. Previously, we faced constant scrutiny regarding our samples. However, this has changed dramatically for the better, and we are very happy with the results.

Without hesitation, I would recommend Qtech Australia. In my opinion, you are the best in the business.

Steven Buchanan - Road Network Manager Veolia

Back in 2008, the cost of disposing of the water I collected was becoming very expensive, as the water facility in Homebush was about to change from Government operated to a private company. I asked the facility how I could reduce the disposal fees, and they replied to take out the heavy material from the water, which was concrete slurry. I started searching for water treatment companies and Qtech was 1 of 4 companies I phoned. I needed a plant that was small and Mobile, as where I was renting at the time wasn’t a permanent position. Max, the owner of Qtech was just starting out too, but was very switched on about water treatment. We hit it off and Qtech has been helping me with every move and expansion ever since. Qtech built my latest plant in 2021. It is completely automated and feeds the treated water directly into a Sydney Water connection. The current plant has processed close to 1 million litres and I haven’t had an issue with it yet. I have also engaged Qtech to do the Sydney Water required testing and it has made running the water plant very easy. I would recommend Qtech to any size company that needs a system to look after their water waste.

Richard Amadio - Founder and CEO of Pumperdump

Before engaging Qtech, we struggled with getting our wastewater within Water Corp parameters. We used water as a form of dilution, which was labour intensive and not the best practice. We wanted to upgrade our WWTP to drive our trade waste results down (cost) and get within parameters for suspended solids, oil & grease, COD, and BOD. The first trade waste results using the new DAF were actually higher than before, but Qtech was able to remotely dial into the system and make changes to the dosing. Since then, our most recent trade waste results have been lower than when we used the old method. Our suspended solids and oil & grease results have been the lowest ever, and BOD & COD are now within Water Corp parameters. The reduction in labour time has been massive—compared to the old method, simply turning on the new DAF has freed up our operator to focus on other duties. I’ve already recommended Qtech to other parts of my company.

Steve Turnbridge - Manager Industrial Services ‑ WA - REMONDIS Australia Pty Ltd
Water and wastewater treatment systems by Qtech Australia
Ready To Talk Water?

STRAIGHT ANSWERS. TAILORED SOLUTIONS.

Looking for a better way to manage your water treatment needs? Contact Qtech for a no-nonsense conversation.

Contact Us Now
Common challenges in water and utility treatment systems

Qtech works with utilities, councils and industrial operators where reliable water and wastewater treatment is essential.

Our systems are designed around real site conditions, helping clients improve performance, manage risk and keep critical operations running.

  • Ageing or underperforming infrastructure
  • Poor or inconsistent water quality outcomes
  • High chemical use
  • Unreliable dosing or control systems
  • Filtration issues
  • pH control problems
  • Recycled water requirements
  • Remote monitoring and alarm needs
  • Compliance pressure
  • Operational risk
Not sure what is causing the issue?

Qtech can review your current system and identify practical improvement options.

Request a Treatment System Review






    Upload photos, reports or documents — optional

    From site assessment to long-term support

    > Site Assessment

    We review your site conditions, water source, process requirements and treatment goals to understand what the system needs to achieve.

    > Water Quality Review

    We assess key water quality parameters and identify the treatment requirements, risks and improvement opportunities.

    > System Design & Manufacture

    Qtech designs and manufactures a practical treatment solution, including filtration, dosing, controls and equipment as required.

    > Installation & Commissioning

    We support installation, testing, commissioning and operator training so the system is set up correctly from the start.

    > Servicing & Optimisation

    Qtech provides ongoing maintenance, chemical supply, troubleshooting and system optimisation to support long-term performance.

    WHY CHOOSE QTECH FOR WATER & UTILITY PROJECTS?

    Qtech brings together engineering, chemistry, automation, fabrication and practical fieldexperience to deliver treatment systems that work in real operating conditions.

    We design solutions around the site, the water quality, the treatment goal and the long-term operation — not just the equipment list.

    Practical system design

    Treatment solutions are designed around your site conditions, water quality, compliance needs and operational requirements.

    Engineering + chemistry together

    Engineering + chemistry together
    Qtech combines process knowledge, chemical treatment, dosing, filtration and automation to support better system performance.

    Built for long-term operation

    We focus on systems that are practical to run, maintain, monitor and support over time.

    Ongoing technical support

    From commissioning to servicing, troubleshooting, chemical supply and optimisation, Qtech stays involved after installation.

    Water drop
    Have a system that needs attention?

    Talk to Qtech About Water & Utility Solutions

    Qtech can review your current setup and recommend practical next steps for better performance, reliability and long-term support.

    Contact Us Now